TECHNOLUBE

MIL-PRF-17672D NAVY SYMBOL OILS ZINC FREE TURBINE / HYDRAULIC OIL

Product Description: Manufactured from the highest quality solvent refined paraffinic base stocks. These products offer excellent resistance to oxidation and rust, superior water demulsibility properties, and are fortified with a very effective non zinc additive to provide outstanding wear protection.

Specifications:
 Manufactured to meet MIL-PRF-17672D.

Uses:
Intended for use in shipboard hydraulic systems not requiring the use of a fire resistant fluid. Also recommended for all types of gas or steam turbines (except those specifying extreme high temperature lubricants), air compressors, pumps, electric motor bearings, speed reducers, and as a general plain or antifriction bearing lubricant.

TECHNOLUBE TURBO 1010 MIL-PRF- 6081 GRADE 1010

JET LUBRICATING ENGINE OIL

Product Description: TECHNOLUBE TURBO 1010 is a petroleum base jet engine lubricating oil manufactured with a highly refined mineral oil meeting the highest standard of quality. An approved anti-oxidant is used to enable the finished product to meet the severe corrosion and oxidation stability requirements of the jet engine.

Specifications:
TURBO 1010 is qualified under Military Specification MIL-PRF 6081, Grade 1010
Uses:
TURBO 1010 is designed for use in jet engines and other high speed turbines where a mineral based fluid is required through a wide range of operating conditions. Because of its excellent low temperature properties, good viscosity temperature behavior anresistance to oxidation, Turbo 1010 is recommended for many other uses.

TECHNOLUBE SAE- J1966

AIRCRAFT PISTON ENGINE OIL, (ASHLESS NONDISPERSANT)

Product Description: TECHNOLUBE SAE SERIES AIRCRAFT ENGINE OILS are premium quality ashless piston engine lubricants. They are manufactured with highly refi ned paraffi nic based oils, ashless nondispersant and oxidation inhibitors. OILS are approved under Military Specification SAE-J 1966
SAE 60, Commercial Grade 120, Military Grade 1120 SAE 50, Commercial Grade 100, Military Grade 1100

Features & Benefits:
Detergent additives to insure a clean engine.
Minimum combustion chamber deposits.
Resistance for oil oxidation and oil thickening.
All these equate to lower operating cost and extended engine life.

TECHNOLUBE MIL-PRF-6083 HYDRAULIC OIL

SUPER CLEAN HYDRAULIC FLUID (PRESERVATIVE)

Product Description: TECHNOLUBE MIL-PRF-6083 is a petroleum base, low viscosity, hydraulic and preservative fluid for aircraft and ordnance use. The TechnoLube MIL-PRF-6083 formulation is a blend of selected petroleum oils with additives to give a product with exceptionally good viscosity-temperature characteristics, good anti-wear properties, controlled rubber swell, good shear stability and excellent oxidation resistance. It is an excellent corrosion preventive and provides a high degree of detergency to maintain clean systems.

Specifications: Uses:

Approved under Military Specification MIL-PRF-6083.

TECHNOLUBE MIL-PRF-6083 is intended for use in aircraft, ordnance and other general hydraulic use, and for preserving hydraulic components. It is used in acceptance testing of hydraulic components intended for use in MIL-H-5606 service. It is used in hydraulic systems of missile ground support equipment where its preservative properties make it particularly suitable for the long periods of inactivity encountered in this service.

TECHNOLUBE MIL-PRF-2104

LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, SERVICE

Product Description: MIL-PRF 2104 motor oils are a blend of highly refined base oils and specially selected additives designed to provide excellent performance in all recommended applications. MIL-PRF 2104 motor oils have the oxidation stability necessary to withstand the high crankcase temperatures encountered in over-the-road service.

TECHNOLUBE FC-001

MIL-PRF-2105 MULTI PURPOSE GEAR OIL

Product Description: TECHNOLUBE FC-OO1 Series Products are petroleum based multipurpose gear lubricants. The lubricants are intended for automotive gear units. Heavy-duty industrial type closed gear units, steering gear and fluid lubricated universal joints of automotive equipment. TECHNOLUBE FC-001 products are formulated with a sulfurphosphorous type additive package. That package contains rust and corrosion inhibitors, extreme-pressure antiwear agents, pour point depressants and foam inhibitors.

Features:
EP protection for hypoid gears .
Excellent oxidation stability at high temperature.
Good rust protection.
Compatibility with other automotive gear oils.
Non-foaming.

Specifications:
FC-001 products meet MIL-PRF-21 05 grades 80W-90 and 85W-140 and API GL-5 Service.
Additionally FC-001 products meet Mack GO-F, Timken Axle Specification 0-64-0-76 and others.

TECHNOLUBE FB-005 MIL-DTL-17111C (OS)

POWER TRANSMISSION FLUID

Product Description: TECHNOLUBE FB-005 is a blend of highly refi ned petroleum base stocks (Naphthenic and Paraffinic) with a highly shear stable Viscosity Index improver with selected additives. FB-005 is a product with very good viscosity-temperature properties, controlled rubber swell, resistance to corrosion and oxidation, and wear protection.

Specifications:
TECHNOLUBE FB-005 is qualified under Military Specification MIL-DTL-17111C (OS)

Uses:
TECHNOLUBE FB-005 is designed for the hydraulic transmission of power; particularly in naval ordnance hydraulic equipment. It provides corrosion protection in the presence of salt water and spray.

TECHNOLUBE FB-003

MIL-PRF-5606H
SUPER CLEAN HYDRAULIC FLUID
(OPERATIONAL)

Product Description: TECHNOLUBE FB-003 is a blend of the highest quality, low viscosity, napthenic base stocks with a highly shear stable viscosity index improver and selected additives. TECHNOLUBE’s FB-003 formulation offers a product with exceptionally good viscosity temperature characteristics, controlled rubber swell, excellent oxidation stability and good anti-wear properties. TECHNOLUBE FB-003 is recommended in closed airless systems from -54 °C (-65° F.) to +135° C(+275°F.) and in open systems up to +71° C(160° F.).

Specifications: 
FB-003 is approved under Military Specification

Uses:
TECHNOLUBE FB-003 is intended for use in automatic MIL-PRF-5606H. pilots, shock absorbers, shock struts, brakes, flap control mechanisms, missile hydraulic servo-controlled systems, and other hydraulic systems using compatible elastomers and seals.

TECHNOLUBE FB-002

MIL-PRF-46170
SUPER CLEAN SYNTHETIC FIRE RESISTANT, RUST INHIBITED HYDRAULIC FLUID
(PRESERVATIVE)

Product Description: TECHNO LUBE FB-002 is a blend of the synthetic hydrocarbons, lubricant grade diesters and selected additives. TECHNOLUBE’s FB-002 formulation offers a product with exceptionally good viscosity temperature characteristics, complete shear stability, controlled rubber swell, excellent oxidation stability and good antiwear properties. TECHNOLUBE FB-002 is recommended in closed systems from -65° F. to above +275° F. in open systems up to 350°F. (for short periods).

Specifications:
FB-002 is approved under Military Specification

Uses:
The hydraulic fluid covered by this specification is MIL-PRF 461700 .
intended for use in the tank recoil mechanism and hydraulic systems.
The fluid is rust inhibited and may be used as a preservative medium for hydraulic systems and components.
The hydraulic fluid covered by this specification is also intended for use in aerospace test stands.

TECHNOLUBE FB-001 F

MIL-PRF-83282D
SUPER CLEAN SYNTHETIC FIRE RESISTANT HYDRAULIC FLUID
(OPERATIONAL)

Product Description: TECHNOLUBE FB-001 F Is a blend of synthetic hydrocarbons, the finest lubricant grade diester and selected additives. TECHNOLUBE’s FB-001 F formulation offers a product with exceptionally good viscosity temperature characteristics, complete shear stability, controlled rubber swell, excellent oxidation stability, and good antiwear properties. TECHNOLUBE FB-001 F. Is recommended in closed airless systems from -65° F. to +275° F. and in open systems up to +225° F.

Specifications:
FB-001 is approved under Military Specifi cation

Uses:
TECHNOLUBE FB-001 F is intended for use in
MIL-PRF-83282.
automatic pilots, shock absorbers, shock struts, brakes,
flap control mechanisms, missile hydraulic servo-controlled systems, and other hydraulic systems using
compatible elastomers and seals.

TECHNOLUBE AE-HD SERIES SAE- J 1899

AIRCRAFT PISTON ENGINE OIL, (ASHLESS DISPERSANT)

Product Description: TECHNOLUBE AW-HD SERIES AIRCRAFT ENGINE OILS are premium quality ashless dispersant piston engine lubricants. They are manufactured with highly refined paraffi nic based oils, ashless dispersants and oxidation inhibitors. AE-HD SERIES OILS are approved under Military Specifi cation SAE-J 1899. (Type II = SAE 60, Commercial Grade 120 / Type III = SAE 40, Commercial Grade 80)

Features & Benefits:
The Technolube AE-HD Series formulations offer:
Detergent-dispersant additives to insure a clean engine.
Minimum combustion chamber deposits.
Resistance for oil oxidation and oil thickening.
All these equate to lower operating cost and extended engine life.

MIL-PRF-9000H, SAE 40

A PREMIUM MILITARY SYMBOL 9250 ENGINE OIL FOR NAVAL SHIP ENGINES

Product Description: MIL-PRF-9000H, SAE 40 is manufactured using high quality base oils to meet the critical demands of a marine trunk piston type diesel engine using relatively high sulfur diesel. It is compounded to provide outstanding engine protection and performance in trunk piston marine engines operating under moderate conditions. An effective detergent-dispersant package prevents ring sticking and lacquering of engine pistons as well as controlling deposits throughout engine. Rust and Oxidation inhibitors are added to prevent engine rusting and to minimize oxidation of the lubricant High Alkaline reserves neutralize acids which results from burned fuel gasses or from oxidized lubricating oil. MIL-PRF-9000H, SAE 40 oil assures excellent anti-wear protection in all metal-to-metal contacts throughout the engine.

Advantage:
MIL-PRF-9000H, SAE 40 exceeds the Service Classifi cations CF/CF-2 requirements.
Recommended to be used in Main Propulsion engine of landing crafts, Diesel Generators aboard ships or as an Air Compressor lubricant.

Features:
High TBN/Alkaline Reserve (>13) effectively neutralizes acids, when used with relatively high sulfur fuels.
Minimizes piston deposits and keeps rings free.
Provides excellent rust and corrosion benefits.
Provides sludge and varnish protection.
Excellent anti-wear protection in all metal- to -metal contacts throughout the engine.

12 Total | Showing Page 1 of 1    
aftonchemical.comchevron.comeastman.comlubrizol.cominfineum.com