CRYSTAL GREASE

NEW MULTI-PURPOSE SYNTHETIC FOOD MACHINERY GREASE NSF H-1 REGISTERED

Product Description: CRYSTAL GREASE is a unique synthetic grease that is colorless and odorless, formulated from synthetic base oils and a proprietary inorganic thickener system. Crystal has excellent wear and rust protection. This unique grease provides excellent water “wash-out” resistance and maintains its consistency in the presence of large amounts of water.

Features:
Multi-purpose machinery grease for many applications-reduces inventory.
Excellent for low temperature use down to - 40° F. (-40° C).
Excellent High temperature use up to 500˚ F.
High temperature protection - Non-Melt.
Provides superior “water wash-out” protection.
Excellent rust protection.
Crystal clear and odorless.
Adhesive, tacky grease that stays in place.
Certified Kosher and Pareve for Passover.

Typical Uses:
Used for the lubricating of all types of grease lubricated bearings commonly found in canneries, beverage bottling plants, potato chip plants, poultry processing plants, meat processing plants and other food processing facilities.
Complies with Food and Drug Administrations (FDA) Federal Regulation 178.3620 and classified under NSF as an H-1 Lubricant where incidental food contact may occur.
Recommended for high speed bearings operating from 3,000 to 5,000 rpm.

DEEP WELL ANTIWEAR PUMP OIL

U.S.P. PREMIUM QUALITY DEEP WELL PUMP OILS NSF H-1 CERTIFIED

Product Description: DEEP WELL AW PUMP OIL is designed to meet the need for domestic and agricultural water well requirements. Manufactured from high VI food grade base stock and fortified with antiwear, corrosion, oxidation, rust & foam inhibitors to provide maximum protection.

Features:
DEEP WELL PUMP OIL is an odorless, tasteless, crystal clear white oil meeting FDA Food Additive Regulation Section 21 CFR 178.3620(b) and NSF H-1 requirements.
Domestic water well drip oil.
Agriculture water well drip oil.
Meets all major hydraulic pump manufacturers specifications: Vickers, Oilgear, Pesco, DeLaval, Denison, Racine, Hydreco, Sunstrant, Dynex, John Barnes, Bellows and Valvair.
General lubrication for use in processing plants when applied where incidental contact with food may occur.
Used in lubrication of plain and anti-friction bearings, airline lubricators, reciprocating air compressors, and moderately loaded gear sets.

Typical Uses:
Protects against wear & scuffing in hydraulic pumps.
Oxidation inhibitor prevents oil from thickening.
Protects against rust and corrosion.
Foam inhibited to prevent pump cavitation.
Superior demulsibility characteristics.
Colorless, odorless, tasteless.
Versatile, premium oil for many food grade applications.
Minimum stray mist when used in airline lubricators.
Certified Kosher and Pareve for Passover.

Performance:
Meets Vickers Sperry V104C.
Denison HF-1, HF-2, HF-0
Cincinnati Milacron
FZG Gear Test.

EGG SPRAY

MULTI-PURPOSE PROTECTIVE COATING/SEALANT

Product Description: Though EGG SPRAY is used primarily for extending the shelf life of eggs by sealing the pores in the shells, this H1 approved white oil may also be used as a lubricant and rust preventative in NSF approved food processing facilities.

Features:
Contains 10 ppm Vitamin E. as an oxidation inhibitor - greatly extends the “life” of the oil.
Low volatility
Low pour point
Excellent color stability
Economical
Certified Kosher and Pareve for Passover.

Typical Uses:
As an egg shell “sealant” to prevent airborne bacteria from spoiling the eggs, thus extending shelf life.
As a lubricant and rust preventative in facilities where there may be incidental food contact.
This product complies with 172.878 of Title 21 of the Code of Federal Regulations.

FEED AND GRAIN DUST STOP OIL

NSF H-1 APPROVED

Product Description: Though used primarily for feed and grain dust control, this H-1 approved white oil may also be used as a lubricant and rust preventative in NSF approved food processing facilities.

Features:
For dust control in the processing of grain in milling operations.
Can be applied to all grains at a rate of 1 to 1½ gallons per 1000 bushels.
As a lubricant and rust preventative in facilities where there may be incidental food contact.
This product complies with FDA Food Additive Regulation 172.878 & 178.3620 of Title 21 of the Code of Federal Regulations.

Typical Uses:
• Contains 10 ppm Vitamin E. as an oxidation inhibitor
- greatly extends the “life” of the oil.
Low volatility
Low pour point
Excellent color stability
Economical
Odorless and tasteless
Retains dust suppression for a period of several handlings.
Will not develop rancidity with long term storage.

FM SEAMER OIL 150

Product Description: FM SEAMER OIL 150 is manufactured from high VI, food grade paraffinic base oils fortified with anti-wear, rust & corrosion inhibitors, and foam inhibitors. Designed for use in Angelus Sanitary Can Machine Company seaming equipments and other similar applications.

Features:
Full film lubrication provided to Seamers.
Provides rust and oxidation protection.
Foam resistance qualities provide longer life.
Does not thin out at high temperatures
Compatible with other food grade gear oils.
Crystal clear color. No odor and tasteless.
Meets FZG Gear Test requirements.
ISO VG 150.

Typical Uses:
Can Seaming equipment.
FMC Rotary cookers and Sterilizers.
Can be used in applications both above and below the food line.
Complies with 172.878 of title 21 of the Code of Federal Regulations. (FDA)

FOOD MACHINERY CHAIN OIL

L NSF H-1 CERTIFIED

Product Description: FM CHAIN OIL is manufactured from a combination of high quality HVI solvent-extracted dual hydrogenated paraffi nic base oils and selected synthetic base oils. These are fortified with food grade antiwear agents and a food grade tackiness agent to impart maximum antiwear and clinging characteristics.

Features:
Economical - tackiness agent reduces oil consumption and journal bearing end leakage.
Certified Kosher and Pareve for Passover.

Typical Uses:
Recommended for lubrication of chains, rollers, and conveyors in industrial plants, contractors equipment, and agricultural equipment such as mechanical tomato and grape harvesters, where food grade lubricants should be used.
Recommended for slow speed journal bearings, slides, ways, crossheads and sprockets.
For use both above and below the product line in canning and bottling plants.
NSF H-1 certified.
Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620

FOOD MACHINERY GEAR OIL

PREMIUM QUALITY FOOD MACHINERY GEAR OIL NSF H-1 CERTIFIED

Product Description: FM CHAIN OIL is manufactured from a combination of high quality HVI solvent-extracted dual hydrogenated paraffinic base oils and selected synthetic base oils. These are fortified with food grade antiwear agents and a food grade tackiness agent to impart maximum antiwear and clinging characteristics.

Features:
Full film lubrication provided to protect gears.
Provides rust and oxidation protection to internal gears and bearings.
Foam resistance qualities provide longer gear and bearing life.
Does not thin out at high temperatures.
Compatible with other food grade gear oils.
Crystal clear color.
No odor.
Meets FZG Gear Test requirements.
ISO 220 complies with AGMA No.5 and ISO 460 complies with AGMA No.7 compounded specifications. ISO 680 complies with AGMA No. 8 compounded specifi cations.
Certified Kosher and Pareve for Passover.

Typical Uses:
Worm gears on industrial equipment requiring food grade gear oils.
Industrial bronze gears.
Spiral bevel and double reduction gears.
Moderately loaded industrial spur, herringbone, helical and bevel gear sets.
Flexible couplings.
Can be used in applications both above and below the food line.
For use in mist applications not requiring mist control.
For use in rotary steamers and valves up to 300°F.
Complies with 172.878 of title 21 of the Code of Federal Regulations. (FDA).

FOOD MACHINERY GREASE

MULTI-PURPOSE ALUMINUM COMPLEX FOOD MACHINERY GREASE NSF H-1 CERTIFIED

Product Description: FOOD MACHINERY GREASE is aluminum-complex-thickened grease, formulated with food grade base oils. Its unique formulation allows it to pass the NSF H-1 standard for incidental food contact. FOOD MACHINERY GREASE has a higher dropping point than traditional aluminumcomplex greases. It is white in appearance and has smooth, buttery consistency.

Features:
Multi-purpose food machinery greases.
For many applications - reduced inventory.
High temperature protection. Excellent rust protection.
Virtually no oil separation.
Adhesive tacky grease that stays in place.
Cost effective food grade lubricant.
Compatible with aluminum, calcium, 12-hydroxy and lithium complexed grease.
Certified Kosher and Pareve for Passover.

Typical Uses:
Used for the lubricating of all types of grease bearings commonly found in canneries, beverage bottling plants, potato chip plants, poultry processing plants, meat processing plants and other food processing plants.
Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620 and classified under NSF as an H-1 lubricant where incidental food contact might occur.

FOOD MACHINERY HYDRAULIC OIL

NSF H-1 CERTIFIED

Product Description: FM HYDRAULIC OIL is manufactured from high VI food grade paraffin base oil fortified with anti-wear, corrosion, oxidation, and foam inhibitor to provide maximum protection to motors and hydraulic systems used in the food and beverage industry.

Features:
Versatile, premium oil for many food grade applications.
Oxidation inhibitor prevents oil from thickening.
Protects against wear & scuffing in hydraulic pumps.
Minimum stray mist when used in airline lubricators.
Protects against rust and corrosion.

Foam inhibited to prevent pump cavitation.
Superior demulsibility characteristics.
Sperry Vickers V104C Denison HF-1, HF-2, HF-0.
Cincinnati Milacron.
FZG Gear Test.
Certified Kosher and Pareve for Passover.

Typical Uses:
Recommended for vane, gear, and piston type hydraulic pumps operating over 1000 psi.
Also recommended for hydraulic pumps operating at lower than 1000 psi.
Widely used in bakery, beverage, canning and meat packing operations as well as plastic injection molding machines, circulating systems, and hydraulic control systems for food grade applications.
Used in lubrication of plain and anti-friction bearings, airline lubricators, reciprocating air compressors, and moderately loaded gear sets.
Meets all major hydraulic pump manufacturers

Specifications: Vickers, Oilgear, Pesco, DeLaval, Denison, Racine, Hydreco, Sunstrand, Dynex, John Barnes, Bellows and Valvair.

Conforms with 172.878 & 178.3620 of Title 21 of the Code of Federal Regulations

GUARDIAN FM TROLLEY LUBE

PREMIUM QUALITY FOOD GRADE TROLLEY LUBRICANT

Product Description: GUARDIAN FM TROLLEY LUBE is manufactured from a combination of high quality Synthetic base oils and selected lubricity additive. FM Trolley Oil is designed to ease gliding of trolley assemblies in meat processing plants, while providing good lubrication, minimized oil dripping and rust protection. The lubricant emulsifies readily. That helps clean the trolley hooks.

Features:
Tasteless, odorless, high viscosity index oil.
Unique additives provide lubricity and rust protection, antiwear performance and tackiness to minimize oil drippings.
Lubricity agents promotes free movements for the trolleys without sticking.

Typical Uses:
Recommended for lubrication of trolley assemblies in meat processing plants.
Recommended for smooth gliding of trolley assemblies and bearings.
Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620.

HI-TEMPERATURE FOOD GRADE CHAIN OIL

Product Description: HI-TEMP FOOD GRADE CHAIN OIL is manufactured from food grade white oil, fortified with food grade anti-wear agents and a food grade tackiness agent to impart maximum anti-wear and clinging characteristics.

Features: Typical Uses:
Non-Drip.
• Recommended for lubrication of oven chains, rollers,
Protects oven chains, rollers, and conveyors from and conveyors, where food grade lubricants should wear under high temperature operating conditions. be used.
Certified Kosher and Pareve for Passover.
• NSF H-1 certified.
• Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620.

SYNLUBE FOOD MACHINERY OIL

Product Description: SYNLUBE FOOD MACHINERY OIL is a fully synthetic, H-1 approved, bearing and gear oils formulated from synthesized hydrocarbon base stocks and additives that enhance oxidation stability and provide exceptional protection against rust and corrosion. SYNLUBE FOOD MACHINERY OIL also contains effective extreme pressure and antiwear agents to minimize wear. These high viscosity index, low traction coefficient oils provide exceptional performance under severe conditions over a wide range of temperatures. Their outstanding oxidation resistance allows for greatly extended drain intervals compared to conventional mineral oils.

Features:
Outstanding antiwear properties.
Exceptional long-life performance.
Excellent oxidation resistance.
Superior rust and corrosion protection.
Low traction coefficient saves energy.
High viscosity index for wide temperature ranges.
Low pour points for low temperature applications
NSF H-1 Certified.
Complies with NSF/FDA Section 21 CFR 178.3620(b) and 21 CFR 172.878.
Miscible with conventional mineral oils.
Certified Kosher and Pareve for Passover.

Typical Uses:
Enclosed gear drives of all types with either splash or circulation systems.

Extreme low or high temperature operating conditions.
Long-life lubricants for initial fi ll of sealed lube systems.
Enclosed gear drives in food processing plants requiring NSF H-1 certified products.

SYNCOM FOOD MACHINERY OIL

Product Description: SYNCOM FM OIL is a fully synthetic, H-1 certified rotary screw air compressor oil formulated from synthesized hydrocarbon base oils and select additives to minimize wear, inhibit rust and corrosion, resist oxidation and minimize foam. SYNCOM FM OIL is available in three ISO viscosity grades to meet the specifi cations of all major builders of rotary screw air compressors. SYNCOM FM OIL off ers extended drains, significantly reduced wear and greatly reduced deposits compared to mineral oils in this demanding service. Superior thermal stability and exceptional oxidation stability allows them to operate without coking or corrosion.
SYNCOM FM OIL is formulated to comply with NSF/FDA Section 21 CFR 178.3620(b) and 21 CFR 172.878 and is NSF H-1, authorized for use in Federally inspected meat and poultry plants.

Features:
Superior thermal and oxidation stability to minimize deposits.
Extended drain intervals.
High viscosity index minimizes consumption.
Significantly reduced component wear.
Excellent rust and corrosion prevention.
NSF H-1 certified.
Miscible with conventional mineral oils.
Certified Kosher and Pareve for Passover.
Reduces energy consumption.

Typical Uses:
All rotary screw air compressors requiring ISO VG 32, 46 or 68 lubricants.
Vane-type air compressors.
Rotary screw air compressors in food processing plants requiring H-1 lubricants.

SYNOIL FOOD MACHINERY OIL

Product Description: SYNOIL FM OIL is a fully synthetic, H-1 certified lubricant formulated from synthesized hydrocarbon base stocks specifi cally for refrigeration compressors in systems using R12, R114 or ammonia as the refrigerant.
SYNOIL FM OIL has zero wax content, exceptionally low pour points, and naturally high viscosity index. Their low solubility characteristics enable them to significantly out-perform naphthenic based refrigeration oils in either reciprocating or rotary screw type compressors.

Features:
Improved wear protection at elevated temperatures.
Miscible with conventional mineral oils.
Certified Kosher and Pareve for Passover.
Reduces energy consumption.

Typical uses:
Refrigeration compressors (both reciprocating and
Improved compressor efficiency. rotary screw type) using R12, R114 or ammonia as the
No deposits in low temperature systems. refrigerant.

NOTE: NOT RECOMMENDED FOR AIR COMPRESSORS.

SYNTHERM FOOD MACHINERY OIL

Product Description: SYNTHERM FM Oil is a fully synthetic H-1 approved heat transfer fluid formulated from synthesized hydrocarbon base oils and select additives to provide maximum oxidation resistance and minimize deposits. SYNTHERM FM Oil resists coking and thermal degradation enabling operation up to 600°F. In heat transfer systems using nitrogen-blanketed surge tanks or cold-leg venting to atmosphere. In systems where venting to atmosphere results in air-oil interface temperatures over 300°F, compared to conventional mineral heat transfer oil, SYNTHERM FM Oil will significantly reduce typical system deposits from oxidation related compounds, resulting in extended service life. SYNTHERM FM Oil has excellent heat transfer
characteristics and exceptional low temperature fl uidity for system start-up. SYNTHERM FM Oils are formulated to comply with NSF/FDA Section 21 CFR 178.3620(b) and 21 CFR 172.878 and is NSF H-1 authorized for use in federally inspected meat and poultry plants. In hot-roll sealing packaging equipment heat transfer systems used in the food industry, SYNTHERM FM Oil offers advantages where leakage may cause incidental food contact.

Features:
Outstanding oxidation resistance minimizes deposits in open heat transfer systems.
Exceptional resistance to coking and thermal degradation in closed systems up to 600°F.
Excellent heat transfer characteristics.
Excellent low temperature fluidity for improved cold system start-ups.
NSF H-1 Certified.
Certified Kosher and Pareve for Passover.

TECHNICAL WHITE OIL 200

Product Description: TECHNICAL WHITE OIL 200 is a very pure technical grade white oil that is suitable for applications requiring conformance to US FDA Regulation 21 CFR 178.3620(B) describing technical white mineral oil for indirect food related uses.

Features:
Economical product when USP quality oils are not required.

Typical Uses:
Rust preventative for meat processing equipment such as meat hooks and slides.
Lubricant for rolling and stamping of metal packaging.
Lubricant for food processing equipment (incidental contact).
This product complies with 178.3620(B) of Title 21 of the Code of Federal Regulations (CFR).

NOTE: TECHNICAL WHITE OIL 200 IS A VERY PURE TECHNICAL GRADE WHITE OIL THAT IS SUITABLE FOR APPLICATIONS REQUIRING CONFORMANCE TO US FDA REGULATION 21 CFR 178.3620(B) DESCRIBING TECHNICAL WHITE MINERAL OIL FOR INDIRECT FOOD RELATED USES.

USP WHITE OIL

NSF WHITE OILS FOR DIRECT FOOD CONTACT

Product Description: USP WHITE OIL is highly refi ned mineral oils which are colorless, tasteless, and odorless. They are especially refined to obtain the highest degree of purity for their use in those applications requiring direct food contact.

Features:
Produced from highly refined hydrogenated paraffin base stocks for:
Low volatility.
Low pour points.
Excellent color stability.
Biodegradable.
Meets NSF specifications for products listed as H-1.
Certified Kosher and Pareve for Passover.

Typical Uses:
USP WHITE OILS meet the requirements of NSF regulations CFR172.878 and CFR178.3620A.
USP WHITE OILS can be used in the following applications:
Cosmetics - cleaners, extenders and grooming aids for hair oils, sun tan oils, and shampoo. Pharmaceuticals - release agent for tablets, carriers.
Food - food equipment lubricants, dough divider oil, baking pan oils, defoamers, fruit and vegetable coatings.
Plastics - plasticizers and internal lubricants, extrusion aids.

CRYSTAL EXTREME GREASE

NEW MULTI-PURPOSE SYNTHETIC FOOD MACHINERY GREASE NSF H-1 REGISTERED

Product Description: The NEW CRYSTAL EXTREME GREASE is unique synthetic grease formulated from synthetic base oils and a proprietary inorganic thickener system. It also has a high amount of Extreme pressure and Adhesive additives which gives it a High Shock Load capability. It has “no” dropping point and is non-melting. It is transparent and is dyed deep Red in color for easy identification and distinction from other greases. The NEW CRYSTAL EXTREME GREASE is formulated to comply with section 21 CFR 178.3620 (B) and 21 CFR 172.878 and is NSF H-1 registered. With its 75 lbs. Timken OK Load Test rating, it stands out as a premium problem solver for use in practically any industry including food and beverage
facilities. CRYSTAL EXTREME GREASE is truly unparalleled in its capabilities off ering. A One Grease Solution throughout an entire facility.
Features:
Exceptional high-temperature bearing performance.
Excellent resistance to water wash-out.
Highly resistant to chemicals & cleaners.

Extremely wide operating temperature range of (-40° F. to 600° F.).
Superior rust protection.
Extreme pressure characteristics for maximum wear protection of highly loaded or shock loaded bearings.
Adhesive, tacky grease that stays in place.
Exceptional oxidation resistance for long service life.
Certified Kosher and Pareve for Passover.

Typical Uses:
Used for both plain and antifriction bearings in food processing equipment, especially high water-wash or high temperature applications where H-1 greases are required.
Extremely High Temperature oven and fan bearings.
High Water Wash out bearing applications.
General purpose grease for all types of plants and “No-Melt” conditions.
Not recommended for High Speed Bearing Operations over 3,000 rpm.
Not for use in Meat Processing Facilities.

CRYSTAL BLUE GREASE

MULTI-PURPOSE SYNTHETIC FOOD MACHINERY GREASE NSF H-1 REGISTERED

Product Description: CRYSTAL BLUE GREASE is a unique synthetic grease formulated from synthetic base oils, a proprietary inorganic thickener system and special extreme pressure and adhesive additives. It has “no”dropping point and is non-melting. It is transparent and is dyed deep blue for easy identification and distinction from other greases. CRYSTAL BLUE GREASE is formulated to comply with NSF section 21 CFR 178.3620 (B) and 21 CFR

172.878 and is NSF H-1 registered for use in federally inspected meat and poultry plants. With its 40 lbs. Timken OK Load Test rating, it offers the Food and Beverage industry H-1 grease that is real EP grease for maximum wear protection.

Features:
Exceptional High-Temperature bearing performance.
Excellent resistance to water wash-out.
High Resistant to Chemicals / Cleaners.
Wide Operating Temperatures (- 40° F. to 600° F.)
Superior rust protection.
Extreme pressure characteristics for maximum wear protection of highly loaded or shock loaded bearings.
Adhesive, tacky grease that stays in place.
Exceptional oxidation resistance for long service life.
Certified Kosher and Pareve for Passover.

Typical Uses:
Used for both plain and antifriction bearings in food processing equipment, especially high water-wash or high temperature applications where H-1 greases are required.
High Temperature oven and fan bearings.
High Water Wash out bearing applications.
General purpose grease for all types of plants and “No-Melt” conditions.
Not recommended for High speed bearings operating over 3,000 rpm.

El contenido de esta página requiere una versión más reciente de Adobe Flash Player.