CHLORINE-FREE TRI!PURPOSE OIL T!35 CF

TRIPLE PURPOSE LUBRICANT ! MACHINE OIL ! HYDRAULIC OIL ! CUTTING OIL

Product Description: PIRANHA TRI-PURPOSE OIL T-35 is a superior tri-purpose, transparent, non-corrosive, light colored, anti-mist cutting oil fortified with a special chlorine-free extreme pressure additive and lubricity additive. The tri-purpose features of this oil allows its use as a cutting oil, hydraulic oil and machine oil in automatic screw machines. This eliminates the intermingling of cutting oil with the machine oils and hydraulic oils as the result of leakage from one system to another. The contamination of machine oil and hydraulic oil by active corrosive cutting oils can have serious consequences in automatic screw machines. This can best be avoided by using one oil for all three applications.

Features:
Triple purpose - reduced inventory.
Economical.
Anti-mist/transparent - good visibility of work piece.
Eliminates contamination problem between machine
oil and cutting oil.
Non-corrosive to work or machine parts .
Non-staining.
Good work piece surface " nish.
High lubricity for long tool life.
Chlorine-free nature of this oil makes it readily disposable.
Dyed green for easy identification.

Typical Uses:
Used as cutting oil, machine oil and hydraulic oil in automatic screw machines.
Well suited for machining non-ferrous metals such as brass, bronze, copper, aluminum and magnesium.
Used in machining steel and its alloys where machining requirements range from light to moderately severe (60-100 machinability).
Lubricity additive makes product an ideal way lubricant.
Anti-mist allows use of product in high speed cutting operations.

DARK CUTTING OIL D-25

A PREMIUM SULPHURIZED CUTTING OIL FOR HONING

Product Description: PIRANHA DARK CUTTING OIL D-25 is a low viscosity oil manufactured from selected base stocks with a special additive concentrate containing sulphurized fat and other agents necessary to meet the critical requirements of honing and lapping operations. This product is designed to produce close tolerances and keep stone open and free of metals.

Features:
Provides long stone life.
Prevents stone from clogging.
Anti-mist to prevent oil fogging.
Rapid cooling properties.

Typical Uses:
Honing and lapping oil for all types of ferrous and ferrous alloys from easy machinability to difficult machinability.

DARK CUTTING OIL D-20

A HEAVY DUTY CUTTING OIL FOR DEEP HOLE DRILLING

Product Description: PIRANHA DARK CUTTING OIL D-20 is a specially formulated low viscosity
naphthenic base oil forti! ed with active sulfur, chlorine, and fat to provide extra anti-weld properties for good surface ! nish and maximum tool life. Contains mist suppressant to prevent fogging. Low viscosity permits rapid settling of small metal chips and allows high production rates in high-speed operations.

Features:
Extended tool life.
Low viscosity allows high production rates in high speed operations.
Anti-mist to control oil fog in high speed operations
Extra anti-weld additive permits machining tough metals such as stainless steels.

Typical Uses:
Broaching operations where light cuts are desired.
Used for deep hole drilling, forming and trepanning of ferrous and ferrous alloys with 30-80% machinability.
Other cutting operations where speed of operation requires a lower viscosity oil than PIRANHA DARK CUTTING OIL D-15.

CLEAR CUTTING OIL C-31

HEAVY DUTY - ACTIVE - TRANSPARENT CUTTING OIL

Product Description: PIRANHA CLEAR CUTTING OIL C-31 is a transparent cutting oil
developed from selected naphthenic base stocks plus active sulfur, chlorine and fatty oils. The
unique combination of chlorine, sulfur and fat provides the extreme pressure properties and
lubricity required for the most di# cult machining operations. Similar to LSC Dark Cutting Oil D-15
in extreme pressure properties and machinability characteristics, but the transparency of this oil
permits operator to better see work piece being cut.

Features:
Transparent Heavy Duty Cutting Oil - Permitsoperator to see work piece being cut.
One oil satisfies 80% of all cutting operations reduced inventory.
Provides smooth surface finish.
Reduces tool/work piece temperature.
Extends cutting tool life.
Anti-mist properties.

Typical Uses:
A transparent cutting oil recommended for all difficult machining on diffcult to machine ferrous and ferrous alloys.
Used in broaching, heavy duty threading, tapping, gear shaving, boring, thread and form grinding
and thread rolling of ferrous and ferrous alloys with machinability ratings of over 70% to below 40%.
Also used in reaming, gear cutting and plain drilling of hard carbon and alloy steels with machinability rating of 50% to below 40%.

CLEAR CUTTING OIL C-30

A GENERAL PURPOSE CLEAR CUTTING OIL

Product Description: PIRANHA CLEAR CUTTING OIL C-30 is a transparent oil manufactured
from selected naphthenic base stocks which contain a chlorine anti-weld agent and fatty oil to
provide smooth surface ! nishes for both ferrous and non-ferrous metals. It is non-staining to
copper, aluminum and their alloys and contains an e" ective anti-mist suppressant.

Features:
Excellent tool life.
Non-corrosive to non-ferrous metals.
Oiliness additive provides smooth surface finish.
Transparent for good visual control of cut.
Effective mist suppressant.

Typical Uses:
Used in broaching, pipe threading, plain threading,tapping, reaming, gear cutting, drilling, and thread rolling of non-ferrous metals and their alloys.
Also used for reaming, gear cutting, plain drilling, and thread rolling of steel and steel alloys that are easy or
moderately di# cult to machine (60-80% machinability).

VANISHING OIL

Product Description: VANISHING OIL evaporates and leaves the surface dry and oil free. Vanishing Oil can be used on ferrous and non-ferrous metals

TRI-PURPOSE OIL T-35

TRIPLE PURPOSE LUBRICANT-MACHINE OIL-HYDRAULIC OIL-CUTTING OIL

Product Description: TRI-PURPOSE OIL T-35 is a superior tri-purpose, transparent, non-corrosive, light colored, anti-mist cutting oil fortified with a special chlorine extreme pressure additive and lubricity additive. The tri-purpose features of this oil allows its use as a cutting oil, hydraulic oil and machine oil in automatic screw machines. This eliminates the intermingling of cutting oil with the machine oils and hydraulic oils as the result of leakage from one system to another. The contamination of machine oil and hydraulic oil by active corrosive cutting oils can have serious consequences in automatic screw machines. This can best be avoided by using one oil for all three applications.

Features:
Triple purpose - reduced inventory.
Economical.
Anti-mist/transparent - good visibility of work piece.
Eliminates contamination problem between machine oil and cutting oil.
Non-corrosive to work or machine parts
Non-staining.
Good work piece surface finish.
High lubricity for long tool life.

Typical Uses:
Used as cutting oil, machine oil and hydraulic oil in automatic screw machines.
Well suited for machining non-ferrous metals such as brass, bronze, copper, aluminum and magnesium.
Used in machining steel and its alloys where machining requirements range from light to moderately severe (60-100 machinability).
Lubricity additive makes product an ideal way lubricant.
Anti-mist allows use of product in high speed cutting operations.

SYNCUT 355

Product Description: SYNCUT 355 is a fully synthetic cutting grinding fluid concentrate formulated with new additive technology to provide maximum versatility in machining operations on both ferrous and non-ferrous metals. It combines exceptional extreme pressure and lubricity characteristics, providing outstanding tool life and surface finish on difficult to machine alloys, in a low pH formulation to minimize corrosion or “white rust” on all aluminum alloys. SYNCUT 355 contains no sulfur or compounds and is “halogen-free,” making it the ideal product for cutting and grinding of titanium where a sulfur and halogen-free coolant is specified. It utilizes new phosphate ester technology enabling it to out-perform other aqueous coolants in heavy duty operations on tough alloys.

SYNCUT 335 provides exceptional anti-rust protection, passing the ASTM D665A Rust Test as dilutions as lean as 100:1. It rejects tramp oil readily for easy skimming, and has excellent bio-resistance for extremely long term service.

Features:
Multi-metal, multi machine application.
Outstanding rust and corrosion protection.
Excellent tramp rejection characteristics.
Mild pH for operator “friendliness”.
Pleasant Odor.
Halogen-free and sulfur-free formulation.
Zero foam characteristics even at 15:1 dilution.
Bio-resistance for long term service.
Oil free maximum biodegradability.
Transparent for easy viewing of work piece.
Dyed Blue.

Typical Uses:
SYNCUT 355 may be used for grinding and light duty machining of both ferrous and non-ferrous metals at the following ratios:
Surface & O.D. Grinding 50:1
Centerless Grinding 30:1
Light Duty Machining 30:1

Moderate Duty Machining 20:1 Severe Duty:



Low A.I.S.I. materials 15:1 Optimum dilution ratios will depend on the actual operation, material, tooling, speeds and feeds as well as surface fi nish requirements

STAMPING OIL

STAMPING LUBRICANT FOR METAL FORMING

Product Description: STAMPING OIL is manufactured from solvent refi ned base stocks that have low pour points. This sulfur-chlorinated product is fortified with selected extreme pressure and anti-rust chemistry. Its superior wetting agents prevent water from displacing the lubricant on the metals’ surface. The lubricity characteristics improve the material release from the press and extend tool life.

Features:
Excellent tool life
Multi-purpose metalworking fluid.
Mist suppressant minimizes fogging.
Good visibility of work piece.
Alkylated organic rust inhibitor.

Typical Uses:
Used manually or automatic on stamping or press operations.
Used in forming where requirements range from light to moderately severe.
Can also be used in various metalworking applications such as screw machines, threading, boring and reaming of steel alloys.
Ideal for small parts forming operations.

QUENCHING OIL 55

PREMIUM GENERAL PURPOSE QUENCHING OIL

Product Description: QUENCHING OIL 55 is a special blend of base oils which combines the high quenching speed of water with the slow final quenching speed of conventional oil in order to provide maximum steel hardness with minimum discoloration. It is oxidation stable and will resist the formation of sludge over extended period. Specially designed to ensure smooth finish.

Features:
Economical - low cost.
Sludge resistant - for long storage life.
High flash point - for fire safety.
Fast quenching without distortion.
Low viscosity - for low drag out rate
15 second quench time

Typical Uses:
General purpose quenching oil for fast quenching of steel parts at bath temperatures up to 250° F.

HD DRAWING OIL

HEAVY DUTY DRAWING OIL CONTAINING EXTREME PRESSURE ADDITIVE

HD DRAWING OIL straight oil. It is a heavy viscosity product formulated with mineral oil. Extreme pressure additive and lubricating agent. It is excellent on ferrous and non-ferrous metals. It can be used for drawing, forming, stamping, punching and other applications.

Features: Typical Uses:
Extreme pressure additive to extend tool and die life.
Non staining additives for use with non-ferrous metals.
Transparent for good visual control.

Typical Uses:
Recommened for:
Drawing
Tapping
Forming
Drilling
Sawing

EDM FLUID

ELECTRICAL DISCHARGE MACHINING FLUID

Product Description: EDM FLUID is a high flash, low viscosity, light colored, oxidation resistant product designed for use as an electrical discharge machining fl uid. It is readily fi lterable, non-corrosive and dissipates heat rapidly. It increases life of electrodes, speeds up production and improves quality of surface finishes. Low viscosity of fluid allows metal fragments to settle out of oil before it recirculates.

Features:
Good dielectric properties provide controlled
electrical discharge.
machining oil.
Good heat transfer quality keeps metal surfaces cool.
High oxidation stability minimizes formation of sludge.
High flash point reduces danger of fire.

Typical Uses:
Used in EDM equipment as an electrical discharge

H.D. SOLUBLE OIL S-47

PREMIUM HEAVY DUTY SOLUBLE OIL FOR DIFFICULT TO MACHINE METALS

Product Description: H.D. SOLUBLE OIL S-47 is a carefully balanced blend of high quality mineral oil combined with an effective emulsifi er, sulfur-chlorine anti-weld additive (EP) and fatty oils for additional lubricity. Used as an emulsion, this product combines the good cooling characteristics of conventional water soluble oils with the high load carrying properties of an active cutting oil. This permits its use where extreme pressure requirements and machining operations are too severe for conventional soluble oils. Additionally, this soluble oil is free of nitrites and phenols and foam inhibited to permit its use in high speed metal cutting operations.

Features:
Excellent cooling ability.
High EP permits machining tough to cut steels.
Smooth work finish provided by lubricity additive.
Increased tool life through balanced additive package.
Forms stable emulsion even with hard water.
Foam inhibited.
Safe to use - nitrite-free and phenol-free.
Wide cutting range - from easy to machine to difficult to machine metals.
Economical.

NOTE: ALWAYS ADD NEAT OIL TO THE WATER. NEVER ADD WATER TO THE OIL. THIS WILL AVOID THE POSSIBILITY OF GETTING AN INVERT EMULSION (WATER DROP SURROUNDED BY OIL) WHICH HAS LOW COOLING ABILITY.

Typical Uses:
Used in cutting difficult to machine ferrous metals of all types. Recommended for use in surface broaching, pipe threading, plain threading and tapping of ferrous metals with machinability rating between 60-100. Recommended water to oil ratio 5:1 through
10:1 depending on machinability rating.
Also used in milling, boring and turning, plain drilling, sawing and thread and form grinding of ferrous metals with machinability rating between 30-100. Recommended water to oil ratio 10:1 through 20:1 depending on machinability rating.

Commonly used in plain grinding operations at ratios between 40:1 through 50:1.
NOT suitable for cutting copper or its alloys as the EP properties will tarnish these metals. Can be used on aluminum.

NOTE: NEVER USE SOLUBLE OIL EMULSIONS FOR CUTTING MAGNESIUM. MAGNESIUM AND WATER ARE A FIRE HAZARD.

H.D. SOLUBLE OIL S-45

PREMIUM HEAVY DUTY SOLUBLE OIL FOR DIFFICULT TO MACHINE METALS

Product Description: H.D. SOLUBLE OIL S-45 is a carefully balanced blend of high quality mineral oil combined with an effective emulsifi er, sulfur-chlorine anti-weld additive (EP) and fatty oils for additional lubricity. Used as an emulsion, this product combines the good cooling characteristics of conventional water soluble oils with the high load carrying properties of an active cutting oil. This permits its use where extreme pressure requirements and machining operations are too severe for conventional soluble oils. Additionally, this soluble oil is free of nitrites and phenols and foam inhibited to permit its use in high speed metal cutting operations.

Features:
Excellent cooling ability.
High EP permits machining tough to cut steels.
Smooth work finish provided by lubricity additive.
Increased tool life through balanced additive package.
Forms stable emulsion even with hard water.
Foam inhibited.
Safe to use - nitrite-free and phenol-free.
Wide cutting range - from easy to machine to difficult to machine metals.
Economical.
Dyed Blue

NOTE: ALWAYS ADD NEAT OIL TO THE WATER. NEVER ADD WATER TO THE OIL. THIS WILL AVOID THE POSSIBILITY OF GETTING AN INVERT EMULSION (WATER DROP SURROUNDED BY OIL) WHICH HAS LOW COOLING ABILITY.

Typical Uses:
For cutting diffi cult to machine ferrous metals of all types.
Recommended for use in surface broaching, pipe threading, plain threading and tapping of ferrous metals with machinability rating between 60-100. Recommended water to oil ratio 5:1 through 10:1 depending on machinability rating.
Also used in milling, boring and turning, plain drilling, sawing and thread and form grinding of ferrous metals with machinability rating between 30-100. Recommended water to oil ratio 10:1 through 20:1 depending on machinability rating.
Commonly used in plain grinding operations at ratios between 40:1 through 50:1.
NOT suitable for cutting copper or its alloys as the EP properties will tarnish these metals. Can be used on aluminum.

NEVER USE SOLUBLE OIL EMULSIONS FOR CUTTING MAGNESIUM. MAGNESIUM AND WATER ARE A FIRE HAZARD.

COOLCUT 100T

Product Description: COOLCUT 100T is a water soluble cutting and grinding fluid formulated for a wide range of machining operations on both ferrous and non-ferrous metals. With its advanced emulsifier technology, it mixes readily with water to form an extremely stable emulsion with excellent surface wetting characteristics and virtually no foam. COOLCUT 100T has exceptional lubricity and extreme pressure properties that give outstanding surface finishes as well as longer tool life compared to conventional heavy duty soluble oils. It has excellent bio-resistance which allows for long term service without rancidity. It contains an effective biocide that controls bacteria and fungi growth without being irritating to machine operator’s skin.

COOLCUT 100T forms an opaque, light blue emulsion with a mild, pleasant odor. It provides excellent rust and corrosion protection and leaves no deposits or build-up on the machine or finished parts.

Features:
Multi-metal, multi-operation applications
Stable emulsion
Excellent surface wetting
Exceptional lubricity and EP characteristics
Outstanding rust and corrosion protection
Excellent bio-resistance for long term service
Low foam even at 15:1 dilution
Mild, pleasant odor
No build-up or deposits on machine or parts
Not irritating to operator’s skin
Dyed Green

Typical Uses:
Coolcut 100T may be used for grinding and machining of both ferrous and non-ferrous metals at the following
ratios:
Surface & O.D. GrindingCenterless Grinding Light Duty MachiningModerate Duty MachiningSevere Duty Machining
50:1 20:1- 30:1 30:1 20:1 15:1

NOTE: NEVER USE SOLUBLE OIL EMULSIONS FOR MACHINING MAGNESIUM.
HOT MAGNESIUM AND WATER ARE A FIRE HAZARD! ALWAYS MIX BY ADDING NEAT COOLCUT 100T TO WATER IN TANK OR COOLANT RESERVOIR.
REMEMBER: WATER FIRST, THEN COOLCUT 100T

A.P. SOLUBLE OIL S-40

PREMIUM QUALITY ALL PURPOSE SOLUBLE OIL

Product Description: A.P. SOLUBLE OIL S-40 is manufactured from a select naphthenic base oil and compounded with an emulsifier which forms a stable milky-white emulsion when mixed with water. Additionally, it is inhibited against foaming, contains excellent rust preventive properties, and will emulsify readily in safe or hard water. This nitrite-free and phenol-free cutting fluid is safe to use in high speed cutting operations.

Features:
Economical.
Forms stable emulsion.
Foam inhibited.
Rust inhibited for protection of machine parts and work piece.
Safe to use: nitrite-free and phenol-free.

NOTE: ALWAYS ADD NEAT OIL TO THE WATER NEVER ADD WATER TO THE OIL. THIS WILL AVOID THE POSSIBILITY OF GETTING AN INVERT EMULSION (WATER DROP SURROUNDED BY OIL) WHICH HAS LOW COOLING ABILITY.



Typical Uses:
Used in cutting of ferrous and non-ferrous metals. Recommended for use in milling, boring and turning operations on non-ferrous and ferrous metals with machinability rating of 50-100. Approximate water to oil ratio; 30:1 for aluminum and copper -10:1 for copper alloys 15:1 for ferrous metals. Also used for such machining operations as planing and shaping, plain drilling and sawing of non-ferrous and ferrous metals with machinability rating 30-100. Approximate water to oil ratio - 30:1 for aluminum and copper -10:1 for copper alloys - 20:1 for ferrous metals. Used for plain grinding operations of ferrous and nonferrous metals at water to oil ratio of 40:1 to 50:1. Other uses: Rust preventative for automotive radiators at 40:1 ratio. Rust preventative in water hydraulic system at 10:1 ratio.
NOTE: NEVER USE SOLUBLE OIL EMULSIONS FOR CUTTING MAGNESIUM. HOT MAGNESIUM AND WATER ARE A FIRE HAZARD.





PARAMETERS
TYPICAL RESULTS AP SOLUBLE OIL S-40
Gravity, °API Appearance Color, D-1500 Viscosity:

SUS @ 100° F.

cSt. @ 40° C. Cold Test @ 40° C. Emulsibility Emulsion Stability Foaming pH, 5% in DI Water
20.6 Bright & Clear 3.5
165 31.75 No Separation Pass Pass Pass 9.2

A.P. SOLUBLE OIL S-50

PREMIUM QUALITY ALL PURPOSE SOLUBLE OIL

Product Description: A.P. SOLUBLE OIL S-50 is manufactured from a select naphthenic base oil and compounded with an emulsifier which forms a stable milky-white emulsion when mixed with water. Additionally, it is inhibited against foaming, microbial growth, contains excellent rust preventive properties, and will emulsify readily in safe or hard water. This nitrite-free and phenolfree cutting fluid is safe to use in high speed cutting operations.

Features:
Forms stable emulsion.
Foam inhibited.
Rust inhibited for protection of machine parts and work piece.
Safe to use: nitrite-free and phenol-free.
Inhibited with an effective anti-microbial agent.
Excellent alkaline reserve.

NOTE: ALWAYS ADD NEAT OIL TO THE WATER. NEVER ADD WATER TO THE OIL. THIS WILL AVOID THE POSSIBILITY OF GETTING AN INVERT EMULSION (WATER DROP SURROUNDED BY OIL) WHICH HAS LOW COOLING ABILITY.

Typical Uses:
Used in cutting of ferrous and non-ferrous metals. Recommended for use in milling, boring and turning operations on non-ferrous and ferrous metals with machinability rating of 50-100. Approximate water to oil ratio; 30:1 for aluminum and copper -10:1 for copper alloys -15:1 for ferrous metals. Also used for such machining operations as planing and shaping, plain drilling and sawing of non-ferrous and ferrous metals with machinability rating 30-100. Approximate water to oil ratio - 30:1 for aluminum and copper-10:1 for copper alloys -20:1 for ferrous metals. Used for plain grinding operations of ferrous and nonferrous metals at water to oil ratio of 40:1 to 50:1. Other uses: Rust preventative for automotive radiators at 40:1 ratio. Rust preventative in water hydraulic system at 10:1 ratio.

NOTE: NEVER USE SOLUBLE OIL EMULSIONS FOR CUTTING MAGNESIUM. HOT MAGNESIUM AND WATER ARE A FIRE HAZARD.

PARAMETERS
TYPICAL RESULTS AP SOLUBLE S-50
Gravity °API Appearance Color, D-1500 Viscosity:
SUS @ 100° F...
cSt. @ 40° C. Cold Test @ 40° C. Emulsibility Emulsion Stability Foaming pH, 5% in DI Water
20.3 Bright & Clear 3.5
142 30 No Separation Pass Pass Pass 9.2

803 QUENCH OIL

PREMIUM HIGH-SPEED QUENCHING OIL

Product Description: 803 QUENCH OIL is a premium high-speed quenching oil containing a balanced blend of base oils and additives to achieve maximum hardness of low-carbon or low alloy steels.

Features: Typical Uses:
Superior oxidation stability. • Recommended where maximum hardening power
Very rapid quench - GMC Quench Test 10-11 seconds. and fast quench are desired.
Made from HVI paraffinic stocks • Used for quenching low carbon or low alloy steels.
Used for steel that has been heat treated in furnace of cyanide salt bath.

PARAMETERS TYPICAL RESULTS
Gravity, °API 28.5 Flash Point, °F. (COC) 350 Pour Point, °F. +5 Viscosity: cSt. @ 40° C. 23.5 Color, ASTM
3.0 GMC Quench Test, seconds
10-11 Sulfated Ash, Wt..%
0.50

801 QUENCH OIL

LOW TO MEDIUM SPEED QUENCHING OIL

Product Description: 801 QUENCH OIL is a relatively low speed quench oil suited for general quenching operations where minimum stress and distortion of quenched parts is desired.

Features: Typical Uses:
Oxidation stable to minimize sludge formation. • Recommended where conventional quench oils are
Made from (HVI) paraffinic stocks. required.
Slow quench time minimizes stress and distortion of • Specifically recommended where slower quench time quenched parts. is desired to minimize distortion and stress on parts

Typical quench test - 28-32 seconds. being quenched.

PARAMETERS TYPICAL RESULTS
Gravity, °API 32 Flash Point, °F. (COC) 375 Pour Point, °F. 0 Viscosity: cSt. @ 40°C. 20.2 GMC Quench Test, Seconds 28-32

700 QUENCH OIL

A GENERAL-PURPOSE MINERAL QUENCHING OIL

Product Description: 700 QUENCH OIL is a blend of highly refined, stable base oils and additives designed to provide proper heat removal rate, good thermal and oxidation stability, and low evaporation losses. This oil is recommended for use as a general-purpose quenching oil in applications which call for quenching rates provided by straight mineral oils.

Features:

Good thermal and oxidation stability for longer life.

Low volatility for economy of operations. rates similar to straight mineral oil are applicable.

Does not stain surface of machined steels.

Parts can be quenched from cyanide and other salt baths without damaging the oil.

Typical Uses:

Used as a general-purpose quench oil where quenching

Recommended operating range 120°-180°F