SUPER BLUE INDUSTRIAL CLEANER

MEDIUM-HEAVY DUTY INDUSTRIAL CLEANER

Product Description: SUPER BLUE INDUSTRIAL CLEANER is a water soluble, synthetic detergent formulated for multi-purpose use. This product is a clear blue, nonflammable liquid with an alkaline pH. SUPER BLUE INDUSTRIAL CLEANER contains wetting agents, grease emulsifiers,
soil-suspending ingredients and is designed to soften water.

Advantages:
Can be used in hot or cold water.
Can be used in hard or soft water.
Rinses easily leaving surfaces film free.
Concentrated for economical use.
When used as directed, will not harm metals, plastics, or rubber.
Contains a bactericide to help control microbial growth.
Good rust inhibition properties.

Recommended Uses:
Industrial Plants
Institutional Organizations
Transportational Operations
Machine and Part Cleaning Shops
Service Bays

Application:
1:5 Dilution up to 1:40 dilution for frequent mild, cleaning jobs.
1:10 to 1:20 dilution is recommend for machine, and parts cleaning.

VACUUM PUMP OIL

Product Description: VACUUM PUMP OIL is a high quality dehydrated, straight mineral oil, with very low vapor pressure.

Features:
A dehydrated oil.
Containers should be kept well sealed to prevent contamination by moisture from any source.

Typical Uses:
VACUUM PUMP OIL is especially suitable for use in vacuum pumps where very high vacuums exist.

MINERAL SEAL OIL

A VERSATILE LOW VISCOSITY COLORLESS OIL

Product Description: MINERAL SEAL OIL is low viscosity, highly refi ned, paraffi nic mineral oil which is almost odorless, colorless and highly oxidation stable

Features:
Colorless: permits use in wide variety of applications (non-staining).
Solvency: assures uniform blending with other components.
Oxidation Stable: long storage or shelf life.
Economical: high recovery absorption oil.

Typical Uses:
Commonly used as gas absorption oil, lamp oil, dust mop oil and instrument calibration fluid.
Also used as a diluent in the manufacturing of germicides, polishes, cleaning compounds, sweeping compounds and ink oils.
Used as a base oil in the manufacturing of aluminum roll oils, drilling muds, textile oils, paper defoamer, oils and caulking compounds.
Used as a “safety cleaning solvent” in areas where lower flash solvents would be unsafe for use.

KNITTING OILS

Product Description: KNITTING Oils are manufactured from a combination of high quality HVI solvent-extracted dual hydrogenated paraffinic base oils which have good lubricity, good oxidation stability and give good protection against rust.

Features:
Good oxidation resistance.
Good lubricity.
Very Light Colour to minimize Staining.
Good Protection against Rust

Typical Uses:
Recommended for use on knitting needles, on full fashion machines using nylon yarn and on circular knit machines where a light oil is required. Can be hand applied by brush, spray or oil can.

HEAVY DUTY ENGINE OIL STABILIZER

Product Description: HEAVY DUTY ENGINE OIL STABILIZER is a unique blend of carefully selected mineral oils, polymers, and extreme pressure agents. The HEAVY DUTY ENGINE OIL STABILIZER stabilizes the oil extending its life and boosting the performance of the engine.

Features:
Stabilizes engine oils.
Eliminates dry starts.
Improves cylinder compression.
Cushions and Seals moving parts.
Excellent Oxidation inhibition properties.
Tenacious.
Increases engine Viscosity by one or two grades.

Typical Uses:
New, used and rebuilt engines.
Foreign and domestic vehicles.
Gasoline and Diesel engines.
Recommended for high performance vehicles.
Recommended treat rate: 20-25 % in new, rebuilt gasoline engines, 20-25 % in diesel engines, and 25-30% in worn gasoline engines.

DIESELTREAT II

Product Description: DIESEL TREAT II is a premium diesel fuel additive for improved lubricity, injector cleanliness, power, fuel economy and reduced emissions and smoke.

Features:
Cleans dirty injectors and keeps them clean for a better running engine.
Improves fuel economy to more than pay for itself.
Reduces emissions & smoke.
Reduces rust and corrosion.
Makes fuel filters last longer.
Reduces injector scuffing, increases fuel systems life.
Does not raise sulfur or aromatic content.
Keeps seals soft & pliable.

Typical Uses:
Recommended at a treat rate of 1 gallon per 400-500 gallons of fuel.
Solves lubricity problems related to CARB diesel.
Thoroughly field tested for 10 years, this product is safe for all diesel engines and will not void warranties.

NOTE: THE DIESEL ADDITIVE IF ADDED AT THE RECOMMENDED DOSAGE WILL MEET THE EPA ULSD GUIDELINES.

DIESELQUENCH

Product Description: DIESELQUENCH is a premium diesel fuel additive for improved injector cleanliness, power, fuel economy and reduced emissions and smoke.

Features:
Recommended at a treat rate of ½ gallons per 400500 gallons of fuel.
Thoroughly field tested for 10 years, this product is safe for all diesel engines and will not void warranties.

Typical Uses:
Cleans dirty injectors and keeps them clean for a better running engine.
Improves fuel economy to more than pay for itself.
Reduces emissions & smoke.
Reduces rust and corrosion. Make fuel filters last longer.
Does not raise sulfur or aromatic content.
Keeps seals soft and pliable.

DEGREASING SOLVENT TYPE II

GENERAL PURPOSE CLEANING SOLVENT

Product Description: DEGREASING SOLVENT, TYPE II is a general purpose, narrow cut, petroleum solvent, which exhibits excellent solvency for a wide range of application. This is a hydrotreated aliphatic hydrocarbon solvent with only trace amounts of Hazardous Air Pollutants (HAPs). The fl ash point specification enables the material to be transported under the Department of Transportation (DOT) Rule HM-181 as a combustible liquid. Releases of vapors are not reportable under SARA 313.

Features:
Economical multi-use solvent.
Readily removes oil and grease.
Dries quickly without leaving oil fi lm.
Non-photochemically reactive as defined by South Coast AQMD, Rule 102.
Complies to AQMD Regulation 8, Rule 4.

Typical Uses:
Most commonly used to clean automotive and machinery parts.
For cleaning oil filters and screens.
For cleaning oily floors.
Commonly used as a diluent in the manufacturing of roof coatings, floor coatings, cleaning compounds and wire rope and cable coatings.

CAUTION: USE IN WELL VENTILATED AREAS AND AWAY FROM OPEN FLAMES.

CONCRETE FORM RELEASE OIL

FORM OIL TO PROTECT METAL AND WOODEN FORMS

Product Description: CONCRETE FORM RELEASE OIL is a light colored naphthenic mineral oil with adequate body to seal and separate wooden and steel forms from concrete.

Features:
Easily applied by brush, mop, or sprayer.
Non-staining, will not discolor concrete.
Non-drying oily surface permits easy removal of removal of forms
 
Typical Uses:
Developed for application to wooden and metal terms used in concrete construction. Facilitates after concrete has set.
Also sprayed on cement mixer drums to facilitate clean-up of cement mixers.

9 Total | Showing Page 1 of 1    
aftonchemical.comchevron.comeastman.comlubrizol.cominfineum.com