ZINC FREE ANTIWEAR HYDRAULIC OIL

ZINC FREE ANTIWEAR HYDRAULIC OIL

Product Description: ZINC FREE ANTIWEAR HYDRAULIC OILS are manufactured from high VI paraffin base oil fortifi ed with anti-wear, corrosion, oxidation, and foam inhibitor to provide maximum protection to motors and hydraulic systems. ZINC FREE ANTIWEAR HYDRAULIC OIL contains a unique combination of phosphorus, sulfur, anti-wear and friction modifying chemical components as well as a combination of metal passivator, demulsifiers, rust inhibitor and defoamer for longer fluid life.

Features:
Versatile, premium oil for many applications.
Oxidation inhibitor prevents oil from thickening
Protects against wear & scuffing in hydraulic pumps.
Minimum stray mist used in airline lubricators.
Protects against rust and corrosion.
Foam inhibited to prevent pump cavitation.
Superior demulsibility characteristics.

Typical Uses:
Recommended for vane, gear, and piston type hydraulic pumps operating over 1000psi.
Also recommended for hydraulic pumps operating at lower than 1000psi.
Widely used in machine tools, presses, die casting equipment, plastic injection molding machines, circulating systems and hydraulic control systems.
Used in lubrication of plain and anti-friction bearings, lubricators, reciprocating air compressors, and moderately loaded gear sets.
Meets all major hydraulic pump manufacturers; Vickers, Oilgear, Pesco, DeLaval, Denison, Racine, Hydreco, Sunstrand, Dynex, John Barnes & Bellows, & Valvair.

WAY LUBRICANT

ANTI-STICK/SLIP LUBRICANT FOR MACHINE TOOL WAYS

Product Description: WAY LUBRICANT is manufactured from high VI paraffinic base oils which have been fortifi ed with oiliness and extreme pressure additives plus a special additive to impart tackiness and adhesiveness necessary to protect ways.

Features:
Low coefficient of friction eliminates stick-slip.
Special additives reduce wear and friction.
Mild EP additive prevents scoring under heavy loads.
Special metal wetting agent protects ways from rust.
Resists water wash off.
Minimum stray mist.
Tackiness agent minimizes oil run off and water.
Improved color.
Sulfur free.
Virtually odorless.

Typical Uses:
Meets requirements of Cincinnati Milacron Way Oil Specification P53 (ISO VG 32), P47 (ISO VG 68), and P50 (ISO VG 220).
Recommended for lubricating slides, ways, and carriages on all types of machine tools such as milling machines, grinders, planers, shapers, horizontal honing machines, etc.
Can be used for lubrication of air operated tools such as jack hammers.
Commonly used in enclosed reduction gears and worm gears under moderate load conditions.

SYNTHETIC HEAT TRANSFER FLUID

Product Description: SYNTHETIC HEAT TRANSFER FLUID is a fully synthetic heat transfer fluid formulated from synthesized hydrocarbon base oils and select additives to provide maximum oxidation resistance and minimize deposits. Synthetic Heat Transfer Fluid resists coking and thermal degradation enabling operation up to 600°F. in heat transfer systems using nitrogen-blanketed surge tanks or cold-leg venting to atmosphere. In systems where venting to atmosphere results in air-oil interface temperatures over 300°F., compared to conventional mineral heat transfer oil, Synthetic Heat Transfer Fluid will signifi cantly reduce typical system deposits from oxidation related compounds, resulting in extended service life. Synthetic Heat Transfer Fluid has excellent heat transfer characteristics and exceptional low temperature fl uidity for system start-up. Synthetic Heat Transfer Fluid offers advantages where leakage may cause incidental food contact.

Features:
Outstanding oxidation resistance minimizes deposits in open heat transfer systems
Exceptional resistance to coking and thermal degradation in closed systems up to 600° F.
Excellent heat transfer characteristics
Excellent low temperature fluidity for improved cold system start-ups

SYNTHETIC AIR COMPRESSOR OIL

Product Description: SYNTHETIC AIR COMPRESSOR OIL is a high quality, fully synthetic lubricant based on advanced diester technology. They are available in five ISO grades to cover a wide range of equipment and operational conditions. All grades offer signifi cant advantages over mineral oils in high temperature applications where long service life and minimal deposits are required. They have outstanding resistance to oxidation, providing up to 10 times the service life of mineral oils.
SYNTHETIC AIR COMPRESSOR OIL offers an extended service life in rotary screw compressor (up to 8,000 hours) and greatly reduced deposits in both single and multi stage reciprocating air compressors. They show major improvements in performance against mineral oils in gear reducers, fan and blower bearings, pumps, mist systems and other applications where premium rust and oxidation inhibited oils are specified.

Features:
Exceptional oxidative and thermal stability
Excellent high & low temperature performance
Minimal deposits and sludging
Superior wear protection
Greatly extended drain intervals
Reduced foaming and air entrainment
Potential energy savings
Excellent corrosion protection

Typical Uses:
Synthetic Compressor Oil offers extended service life in rotary screw compressors (up to 8,000 hrs) and greatly reduces deposits in both single and multi stage reciprocating air compressors.
They show major improvements in performance against mineral oils in gear reducers, fan and blower bearings, pumps, mist systems and other applications where premium rust and oxidation inhibited oils are specified.

STEAM CYLINDER OIL

HIGH QUALITY STEAM CYLINDER AND INDUSTRIAL OIL

Product Description: STEAM CYLINDER OIL is manufactured from high VI paraffinic base stocks compounded with fatty oils which act as wetting agents to improve emulsibility and metal wetting properties in the presence of wet steam or water.

Features:
Excellent metal wet ability
Steam cylinder oil for all steam pressures and temperatures.
Excellent worm gear lubricant
Minimizes inventory

Typical Uses:
ISO Grade 460 is recommended for low steam pressures between 75 and 150 PSI temperatures between 340°F to 400°F.
ISO Grades 680 and 1000 are recommended for high steam pressures over 300 PSI with steam temperatures 400 F. to 590 F.
None of the above steam cylinder oils are suitable when the exhaust steam condensate is returned to the boiler.
ISO Grades 460, 680 and 1000 meet the AGMA 7, 8 and 8A compounded specifications and are suitable for the lubrication of worm gears and other low speed reduction gears.
Suitable for lubrication of heavily loaded journal bearings
Suitable for gas compressor cylinders when compressing wet gas.

R & O INDUSTRIAL OIL

Product Description: R & O INDUSTRIAL OILS is manufactured from high quality, highly refined paraffin base stocks. A well balanced additive package provides excellent oxidation resistance, and good protection against rust, corrosion and foam. Oxidation stability at high temperatures reduces the tendency of the oil to thicken in service and the potential for deposit and sludge formation. Excellent demulsibility enables the oil to separate from water quickly.

Features:
Excellent oxidation stability for long life at elevated temperatures.
Separates quickly from water.
Non foaming.
Retains viscosity over wide temperature range.
Superior rust protection.
Low carbon forming tendencies in air compressors.
Minimum effect on most seal materials.

Typical Uses:
Recommended for air compressors.
Hydraulic systems operating under 1000 PSI which do not require antiwear additives.
Plain and anti-friction bearings, electric motor and generator bearings, vacuum pumps, and speed reducers.
Centrifugal, turbine and deep well pumps.
Gear cases requiring AGMA Specifi cation
R & O Lubricants 1 through 6.
General purpose lubrication.

PNEUMATIC TOOL LUBRICANT

Product Description: PNEUMATIC TOOL LUBRICANTS is manufactured from solvent refi ned paraffi nic base stocks that have low pour points and are fortified with anti-rust, extreme pressure, and tackiness additive that give the lubricant adhesive characteristics. In addition, it contains an emulsifying agent that causes it to combine with water to prevent water from wetting metal surfaces and displacing lubricant.

Features:
Excellent extreme pressure properties to protect air operated tools from seizure.
Good adherence to wet surfaces.
Good rust preventive properties.
Provides proper atomization into airlines ahead of tool.

Typical Uses:
Meets specifications of Gardner Denver, Chicago Pneumatic, Joy Manufacturing and Ingersoll-Rand when appropriate viscosity grade is used.
ISO VG 22, 32, 46 and 68 is recommended for small high speed air operated drills at low atmospheric temperatures.
ISO VG 100 is for jack hammers, pavement breakers, drifters and wagon drills operating under average conditions.
Also suitable as lubricant for cylinders of vacuum pumps that are operating under moist or wet air conditions.
ISO VG 150 and 320 are designed for larger slow speed drills operating under high temperature conditions.

PAPER MACHINE OIL

PREMIUM QUALITY PAPER MACHINE OIL

Product Description: PAPER MACHINE OIL is formulated from premium quality high VI paraffinic base oils, combined with selected additives package to provide resistance to foaming, rusting, corrosion, and oxidation. In addition, it contains an effective antiwear agent and detergent-dispersant to keep contaminants suspended in the oil. Demulsibility agent provides rapid water separation with conventional settling or centrifuging equipment.

Features:
High oxidation stability assures long service life.
Effective detergent-dispersant keeps contaminants in suspension and prevents formation of sludge.
Excellent thermal stability permits use under high temperature conditions found in dryer roll bearings.
High alkaline reserve provides protection against corrosive acids and rusting.
Mild EP additives permit use in industrial gear sets.
Miscible with other paper mill circulating oils.

Typical Uses:
PAPER MACHINE OIL 150 and 220 is recommended for use in the circulating systems of paper machine dryer section of those manufactured by; Beloit, Black-Clawson, Rice-Barton, and others.
Recommended for use in all types of industrial reduction gears and gear head motors where high Timken values are not required.
Also used and recommended for vacuum pumps and hydraulic systems.

MULTI-VIS ANTIWEAR HYDRAULIC OIL

A WIDE TEMPERATURE RANGE PREMIUM ANTIWEAR HYDRAULIC OIL

Product Description: MULTI-VIS AW HYDRAULIC OILS are premium quality anti-wear hydraulic oil blended from solvent extracted paraffinic base oils and fortified with oxidation, corrosion and foam inhibitors. An effective VI improver has been added to provide an extremely high viscosity index which permits this product to be used in hydraulic systems that are subject to wide ambient and system operating temperature ranges.

Features:
High viscosity index provides excellent hydraulic response at both high and very low ambient temperatures.
Oxidation inhibited to prevent oil thickening and provide long service life.
Foam inhibited to prevent pump cavitation.
Anti-wear additive protects against wear and scuffing.
Mist inhibited to permit use in airline lubricators.
Reduced inventory - one oil for many applications.

Typical Uses:
Recommended for use in mobile construction equipment, vane, gear and piston type hydraulic pumps operating over wide temperature range. High VI permits good hydraulic response at both high and low temperature operations.
Suitable for use in all industrial hydraulic systems operating up to 3,000 PSI.
Used for lubrication of plain and anti-friction bearings, airline lubricators, reciprocating air compressors and moderately loaded industrial gear sets.

LUBE TAC

AN ECONOMICAL NO – DRIP OIL

Product Description: LUBE TAC is a medium VI solvent extracted napthenic base oil compounded with a tackiness additive to improve film strength and adhesiveness.

Features:
Economical once-through lubrication
Tackiness agent reduces oil consumption and“Sling Off”
Protects sliding surfaces and chains against wear.

Typical Uses:
Used as a non-drip chain and sprocket lubricant.
Frequently used on slides, ways crossheads and loose fitting journal bearings where leakage is a problem.
Also recommended for semi-enclosed gears which are splash lubricated
Used as an inexpensive bar lubricant for chain saws.

LONG LIFE TURBINE OIL

PREMIUM LONG LIFE TURBINE OILS FOR USE IN INDUSTRIAL CIRCULATING SYSTEMS WHERE THE HIGHEST QUALITY RUST AND OXIDATION INHIBITED LUBRICANT AVAILABLE IS REQUIRED

Product Description: LONG LIFE TURBINE OIL is formulated with selected premium base stocks carefully refined to insure exceptional performance and long service life. Special inhibitors enhance the product by providing improved resistance to break down caused by oxidation and the formation of deposits on critical machinery surfaces. They also protect vital equipment parts from rust and corrosion both during operating service and when the equipment is idle. In addition, foam and air release properties are controlled by foam inhibitors and low temperature capability improved by a flow improver. In the ASTM D-943 “Turbine Oil Stability Test”, Long Life Turbine Oil passes more than 10,000 hours indicating the ability to provide an extremely long service life. LONG LIFE TURBINE OIL is formulated to meet the following equipment manufacturers turbine oil specifi cations (in the appropriate viscosity grade): Allis Chalmers Power System 1.3-0220, General Electric Steam Turbine GEK-46506C and Gas Turbine GEK-28143A and GEK-32568A, Solar ES 9-224, Westinghouse Steam Turbine 1L-1250-4710-B and Gas Turbine 1L-1250-5312, Mil-L-17672C, British Standard BS 849, German Standard DIN 51524 Part 1 and DIN 51515, AFNOR NFE 48-600 HL. The following industrial specifications are also targeted: AGMA R, R&O Gear Oils, US Steel 126, Cincinnati Milacron P-38, P-54, P-55, P-57, P-62, Alcoa ML 523, 570, 589, 601, 606, 625, 680, 682, 686, Haglund-Denison HF-1.

Features:
Long service life due to unique base oil and additives.
Excellent corrosion protection in the presence of water.
Superior thermal stability.
Foam inhibited to prevent air-entrainment and excessive foam buildup in service.
Good hydrolytic stability when used in wet systems.

Typical Uses:
Recommended for:
Steam Turbines
Gas Turbines
Hydraulic Systems
Industrial Gear Cases
Heat Transfer Systems
Airline Lubricators
Oil Circulating Systems
General Machinery Lubrication \

ICH MACHINE OIL

ICE MACHINE, COMPRESSOR, HYDRAULIC AND GENERAL MACHINE OIL

Product Description: Straight medium viscosity index mineral oils manufactured from selected solvent refined naphthenic base stocks with excellent thermal stability, low pour point and low carbon forming characteristics. It has good natural oxidation, corrosion and foam resistance characteristics. Low wax content gives good fluidity at low temperatures.

Features:
Low cost - economical lubrication.
Low wax content gives exceedingly low pour point.
Low carbon residue reduces tendency to form carbon on hot surfaces.
Multi-use industrial oil.

Typical Uses:
Used as economical hydraulic oil where non antiwear oil is permissible and unit is in mild service.
ISO VG 32, 46 and 68 are commonly used in reciprocating ice machine compressors using ammonia and carbon dioxide as refrigerant.
NOT recommended for compressors using FREON or other refrigerants where evaporator temperature is below -35° F.
NOT recommended for reciprocating compressors using SULFUR-DIOXIDE as a refrigerant, these compressors generally use a white oil.
Other uses include one “once-through” lubrication for high and low speed plain and anti-friction bearings, cross heads, slides, ways, chains, and general machine shop lubricant.

NOTE: ICH OILS ARE NOT RECOMMENDED FOR USE IN HIGH PRESSURE HYDRAULIC PUMPS (800PSI OR GREATER).

HEAT TRANSFER FLUID

A PREMIUM QUALITY HEAT TRANSFER FLUID

Product Description: HEAT TRANSFER FLUID 32 & 46 are manufactured from solvent extracted paraffinic base oil specifically designed for use as a heat transfer fluid. Contains an effective inhibitor to assist in keeping systems clean and resist oxidation and thermal cracking. The low viscosity of Heat Transfer Fluid 32 & 46 permits rapid and effi cient transfer of heat and greater ease of circulation.

Features:
Low viscosity for efficient heat transfer.
Good thermal and oxidation stability for long service life.
High thermal conductivity for quick rates of heat transfer.
Low pour point to avoid cold start difficulties.
Non-corrosive to steel, stainless steel or aluminum heat transfer systems.
Economical - long life oil.

Typical Uses:
Recommended for use in both “open” and “closed” systems found in asphalt plants, chemical plants and other industries.
Used in closed systems where the bulk fluid temperature does not exceed 600° F.
Used in open systems where fluid temperatures do not exceed 395° F. at point of contact with air. The fluids most likely point of contact with air occurs at the expansion tank which is vented to the atmosphere.
Petroleum products are not recommended for heat transfer systems where bulk fluid temperature exceeds 600° F. in both “open” and “closed” systems.
In open systems where oil is exposed to air, the oil temperature should always be 25° F. lower than the flash point of the oil.

HD CHAIN OIL

PREMIUM QUALITY CHAIN OIL

Product Description: HD CHAIN OIL is manufactured from a high quality medium VI solvent extracted naphthenic base oil fortified with molybdenum disulfide and a tackiness agent to impart maximum antiwear and clinging characteristics.

Features:
Economical - tackiness agent reduces oil consumption.
Friction modifier (Moly) reduces wear.
Tackiness agent reduces journal bearing and leakage.
Reduces inventory - one oil for many uses.

Typical Uses:
Recommended for lubrication of chains, rollers, and conveyors in industrial plants, contractors equipment, and agricultural equipment such as mechanical tomato and grape harvesters.
Recommended for slow speed heavy loaded journal bearings, slides, ways, crossheads and sprockets.
Chain saw bar and chain lubricant.

FLAMEPROOF 200

Product Description: FLAMEPROOF 200 fire resistant hydraulic fl uid is a water/glycol based hydraulic fluid, which contains no nitrites and therefore should contain no nitroamines. The water contained in this fluid makes it less susceptible to spray or mist ignition associated with industrial hydraulics. FLAMEPROOF 200 is compatible with most of the elastomeric sealing and packing material, such as natural rubber, SBR, Viton, Butyl, Nitrile, EPR, and Neopreme. Materials that are incompatible, such as leather, cork, untreated cotton or cellulose, should be replaced. FLAMEPROOF 200 fire resistant hydraulic fluid is designed to meet the demands of today’s modern high pressure hydraulic systems. The proprietary inhibitors in this product protect the entire hydraulic system against wear and corrosion damage. FLAMEPROOF 200 excels in die casting and foundry applications.

Features:
No flash or fire point. Maximum safety.
FLAMEPROOF 200 has a flash of 250° F... only after the water is boiled away.
Outstanding corrosion protection to common metals in both liquid and vapor phases.
Superior lubricating properties.
Meets factory mutual requirements for less hazardous fire resistant hydraulic fluids.
Diethanolamine free!
Good hydraulic pump wear protection.

Typical Uses:
Industrial applications, casting, forging, steel mills, underground mining and off-shore oil drilling.
Hydraulic systems under pressure or near open flames or in high temperature areas.
Compatible with all water-glycol hydraulic fluids in any proportion.

EDGER ARBOR OIL

ARBOR SAW OIL

Product Description: EDGER ARBOR OIL is a select, light-colored base oil containing an effective gum and pitch softening agent to prevent pitch build up on saw arbors which allows saws to move freely on arbors.

Features:
Economical - low cost.
Lubricity additive provides smooth surface finish.
Mist suppressant minimizes fogging.
Reduces cutting tool wear.

Typical Uses:
Lubrication of saw arbors or other bearings where wood pitch, resins, or gum interfere with proper lubrication.
Can be used as a concrete form oil either straight or cut-back with diesel fuel.
Used as mineral-fatty oil for cutting or working non-ferrous metal.
Additive in this product reacts adversely with zinc.

DO NOT USE WITH GALVANIZED PIPE OR IN MECHANICAL LUBRICATORS MANUFACTURED FROM HOT METAL.

CP SPINDLE OIL

COTTON PICKER SPINDLE OIL

Product Description: CP SPINDLE OIL 10 is a light colored, low viscosity, naphthenic base oil used for cleaning and flushing spindles with minimum staining of cotton. CP SPINDLE OILS 22 and 46 are light colored, non-staining, naphthenic base oil with special additives to provide excellent protection against rust, oxidation and foaming.

Features:
Economical lubricants
Provides clean free running spindles
CP 22, and 46 provide excellent rust protection
All grades are light in color to minimize cotton staining
Economical hydraulic oil where antiwear additives are not required.

Typical Uses:
CP SPINDLE OIL 10-commonly called “spindle slick”, is used for cleaning and removing cotton fi bers from spindles.
Water-oil mixtures are also used for this purpose. For water-oil mixtures recommend LSC AP Soluble Oil S-40
CP SPINDLE OIL 22 is recommended for lubrication of cotton pickers using drip lubricating systems.
CP SPINDLE OIL 46 is recommended for lubrication of cotton pickers using flush lubricating systems.
CP SPINDLE OIL 46 is also used as a “drip oil” for deep well pumps.
CP SPINDLE OIL 46 is used as an in-expensive
hydraulic oil where high oil consumption is a problem and anti-wear additives are not required.

BIODEGRADABLE ANTIWEAR HYDRAULIC OILS

BIODEGRADABLE ANTIWEAR HYDRAULIC OIL

Product Description: BIODEGRADABLE ANTIWEAR HYDRAULIC OILS are fully formulated, thermally stable, non-zinc containing antiwear hydraulic oil for use in both high and low pressure hydraulic systems for industrial and mobile applications. It contains a unique combination of phosphorus, sulfur, antiwear and friction modifying chemical components as well as a combination of metal passivator, demulsifiers, rust inhibitor and defoamer for longer fluid life. Developed as an alternative to mineral based hydraulic fl uids where good low temperature properties, improved oxidation stability, low toxicity and fluid biodegradation properties are required.

Features:
Superior hydrolytic stability.
Excellent EP performance.
Outstanding oxidative stability.
Excellent rust protection.
Good demulsibility and anti-foam properties.
No heavy metals.
Good low temperature properties.
Excellent antiwear performance.
Biodegradable - CEC/Sturm test (OECD 301B) methods.

Typical Uses:
Vickers I-286-S, M-2950-S.
Cincinnati Milacron P-68, P-69, P-70.
DIN 51524 Part 2.
Racine, Variable, Volume Vane Pumps.
AFNOR NFE 48-603HM.
Lee-Norse 100-1.
Jeffrey No. 87.
Ford M-6C32
B.F. Goodrich 0152.
General Motors LH-04-1, LH-06-1, LH-15-1.

BAR CHAIN OILS 150

PREMIUM QUALITY CHAIN OIL

Product Description: BAR CHAIN OIL is manufactured from a high quality medium VI solvent extracted naphthenic base oil fortified with “tackifier” agent to impart maximum anti-wear and clinging characteristics.

Features:
Economical tackiness agent reduces oil consumption.
Tackiness agent reduces journal bearing end leakage.
Reduces inventory - one oil for many uses.

Typical Uses:
Recommended for:
Recommended for lubrication of chains, rollers, and conveyors in industrial plants, contractors equipment, and agricultural equipment such as mechanical tomato and grape harvesters.
Recommended for slow speed heavy loaded journal bearings, slides, ways, crossheads and sprockets.
Chain saw bar and chain lubricant.