WORM GEAR OIL 250

WORM GEAR LUBRICANT API GL-2 TYPE

Product Description: WORM GEAR OIL 250 is manufactured from high VI paraffin base oils blended with special mild extreme pressure additives required for sliding action encountered in the lubrication of worm gears. Gear lubricant is non-corrosive to copper and bronze gears commonly found in worm gears, as it contains an effective oxidation and corrosion inhibitors, as well as foam suppressant.

Features:
Non-corrosive to bronze gears on copper bearings.
Excellent mild extreme pressure additive suitable for worm gears.
Non-foaming.
Compatible with straight mineral gear lubricants.

Typical Uses:
Recommended where GL-2 type lubricant is required.
Timken Axle Specification 0-74.
AGMA 8A.
Recommended for Worm drives and reduction gears for trucks, tractors and industrial worm reduction gears where an SAE 250 lubricant is required.
Flexible coupling lubricant.
Journal bearing lubricant.

UNIGEAR

SUPER-PREMIUM VERSATILE, EXTRA HEAVY DUTY GEAR LUBRICANT - GL-5 PLUS

Product Description: UNIGEARis a multi-purpose sulfur-phosphorus type hypoid gear lubricant exceeding requirements of API Service Classifi cation GL-5. It is manufactured from highest quality base oils fortifi ed with VI improvers, rust inhibitors, foam suppressants, anti-wear and extreme pressure additives and pour point depressants. The multi-viscosity grades may be used over wide temperature ranges.

Features:
Exceptional thermal and oxidative stability to protect parts and ensure maximum performance.
Protects hypoid gears from wear and scuffing.
Provides rust protection to gears.
Multi-purpose for minimum inventory.
Multi-viscosity provides year round use. Non-foaming.
Compatible with other automotive gear oils.

Typical Uses:
Exceeds API GL-5 and MT-1.
Meets SAE J2360 requirements.
Exceeds Mack Specifi cations GO-F, GO-G, GO-H, and GO-J.
Rockwell Specification 0-76A and 0-76D.
Recommended for differentials and conventional transmissions in passenger cars and trucks where GL-5 fluids are specified.
Suitable as make-up in limited slip differentials. (Factory specified lubricant required on complete refill of new or rebuilt units.)

SYNTHETIC MANUAL TRANSMISSION SAE 50

SYNTHETIC MULTIPURPOSE EP GEAR LUBRICANT

Product Description: SYNTHETIC MANUAL TRANSMISSION SAE 50 is a synthetic multipurpose gear lubricant designed specifically for high performance automotive applications. This lubricant is well suited for areas where low temperature start-ups may be encountered. It is specially recommended for Manual Transmission and Long Drain capabilities.

Features:
Allows start-up at extremely low temperatures.
EP additives for wear protection.
Good rust protection. and Long Drain performance properties.
Compatible with other automotive gear oils.
Improves fuel economy.
Very high VI for wide temperature operation.
Non-corrosive and foam resistant

Typical Uses:
API Service GL-4.
Recommended for gear boxes requiring Fuel economy

RED-TAC EP GEAR OIL

HIGH FILM STRENGTH, HEAVY DUTY EXTREME PRESSURE GEAR OIL

Product Description: RED-TAC EP GEAR OIL is a sulfur-phosphorus type gear lubricant exceeding the requirements of API Service Classifi cation GL-5. Manufactured from premium quality high VI paraffin base oil fortified with a tackiness agent, rust and corrosion inhibitor, extreme pressure antiwear additive, pour point depressant and foam inhibitors.

Features:
Tackiness agent to cling to the gear sets.
Extra high film strength.
Protects hypoid gears from wear and scuffing.
Has exceptional thermal and oxidative stability to resist sludging.
Provides rust protection to gears.
Multi-viscosity provides year round use.
Non-foaming.
Distinct red color for easy identifi cation & leak detection.
Compatible with other automotive gear oils.

Typical Uses:
Exceeds API Service Quality GL-5 and MT-1.
Meets SAE J2360 requirements.
Mack Specification GO-G, GO-H, and GO-J.
Recommended for differentials and conventional transmissions in passenger cars and trucks where GL-5 type lubricant is specified.

OPEN GEAR AND CABLE LUBRICANT

ADHESIVE, WATER-RESISTANT OPEN GEAR LUBRICANT

Product Description: OPEN GEAR AND CABLE LUBRICANT is an asphalt-free lubricant, specially formulated for ease of application through a centralized system or by hand application.

Features:
Long lasting protection because of tackiness and durability of coating.
Water resistant - offers rust protection in wet applications.
Provides corrosion protection to cable and chains.
Extreme pressure properties protect heavily loaded gears from scoring and galling.
No longer contains asphalt

Typical Uses:
Lubrication of wire ropes, cables, flexible couplings, chains, open gears, and partly enclosed gears.
Also used on sliding surfaces of drag lines and shovels.
Open gears of mine hoists, ball mills, rubber mixers, cement mills, coke ovens, construction equipment, and other applications where adhesive grease is required

MP GEAR AND MULTI-GEAR OIL

PREMIUM MULTIPURPOSE GEAR OIL

Product Description: MP GEAR OIL is a multi-purpose sulfur-phosphorus type hypoid gear lubricant meeting requirements of API Service Classification GL-5. It is manufactured from highest quality base oils fortified with VI improvers, rust inhibitors, foam suppressants, antiwear and extreme pressure additives and pour point depressants. The multi-viscosity oil formulations permit use over a wide temperature range.

Features:
Protects hypoid gears from wear and scuffing.
Provides rust protection to gears.
Multi-purpose for minimum inventory.
Multi-viscosity provides year round use.
Non-foaming.
Compatible with other automotive gear oils.

Typical Uses:
Meets API GL-5 and MT-1.
Meets SAE J2360 requirements.
Meets Mack specifications GO-F, GO-G, GO-H, GO-.J.
Meets Rockwell Specifi cation 0-76A, 0-76B and 0-76D.
Recommended for differentials and conventional transmissions in passenger cars and trucks where GL-5 fluids are specified.
Suitable as make-up in limited slip differentials. (Factory specified lubricant required on complete refill of new or rebuilt units)

MINERAL GEAR OIL

STRAIGHT MINERAL GEAR OIL API GL-1 TYPE

Product Description: MINERAL GEAR OIL is a high VI paraffinic base oil fortified with rust and corrosion inhibitors, foam inhibitors and pour point depressant. Product contains no extreme pressure additives and is not recommended for use in hypoid gears.

Features:
Full film lubrication provided to protect gears.
Provides rust protection to internal gears and bearings.
Foam resistance qualities provide longer gear and bearing life.
Does not thin out at high temperatures.
Compatible with other gear oils.

Typical Uses:
Recommended for manual transmissions requiring API GL-1 type fluids.
Timken Axel Specification 0-62 and 0-63.
Worm gears on automotive and industrial equipment.
Bronze gears both automotive and industrial.
Spiral bevel and double reduction gears.
Tractor transmissions and final drives calling for GL-1, gear lubricant.
Industrial spur, herringbone, helical and spiral level Gear sets.
Flexible coupling.

LIMITED SLIP GEAR OILS

HIGH PERFORMANCE MULTIPURPOSE EP GEAR LUBRICANTS

Product Description: LIMITED SLIP GEAR OILS are multipurpose gear lubricants designed specifically for high performance automotive applications using high quality paraffinic base oils. Required for many European automobile models, this lubricant is well suited for areas where low temperature start-ups may be encountered.

Features:
Allows start-up at extremely low temperatures.
EP additives for wear protection.
Good rust protection.
Compatible with other automotive gear oils.
Improves fuel economy.
Very high VI for wide temperature operation.
Non-corrosive and foam resistant.
Contains “Friction Modifier” for the Limited-Slip.
Friction Modifier helps reduce ”Clutch Chatter” thereby improving the Clutch Life.

Typical Uses:
API Service GL-5.
Meets SAE J2306 ( MiL-PRF-2105E) requirements.
High performance European automobiles.
Recommended for BMW final drives requiring limited-slip performance properties.
Recommended by GM, Ford, Chrysler, Mercedes, Mitsubishi, Volvo, Toyota.

INDUSTRIAL EP GEAR OIL

PREMIUM INDUSTRIAL EP GEAR OIL (NON-LEADED)

Product Description: INDUSTRIAL EP GEAR OIL is formulated from high quality high VI base oils combined with selected additives to provide resistance to foaming, rusting, corrosion and oxidation. A sulfur-phosphorus additive is used to give this oil its extreme pressure characteristics which permit industrial gears to withstand heavy loads and shock loading. Unique additive package employed in industrial EP Gear Oil is non-corrosive to brass, bronze, steel or other alloys.

Features:
Truly multi-purpose product- wide range of applications.
Excellent EP and antiwear properties.
Superior thermal stability for longer service life.
Compatible with steel, bronze, copper and copper alloys.
Versatile multi-purpose industrial gear oil of outstanding quality.
Available in all ISO grades.

Typical Uses:
Meets AGMA (American Gear Manufacturers Assn.) Gear Specifications 2 EP thru 8 EP.
Used in bevel, spur, herringbone, planetary, worm and industrial hypoid gears.
Also used in chain drives, sprockets, plain and antifriction bearings, slide guides and fl exible couplings.
Recommended for use in manual transmissions, gear cases and worm gears on mobile contractor type equipment.

El contenido de esta página requiere una versión más reciente de Adobe Flash Player.